Solution 2577 is a highly effective acidic liquid for removing process oils and oxide off aluminum surfaces in one simple step. Solution 2577has an excellent surfactant package that is very effective in completely wetting out the part surface as well as ensuring a thorough rinse, which offers better corrosion protection.Solution 2577also offers a controlled etch rate that provides a uniformed micro-etched surface for further processing.
USING PROCEDURES
For most operations, Solution 2577 should be used at 5% to 20% b/v. Consult your Win Solutions representative for the optimum operating concentrations.
Solution 2266
Solution 2266SW is a premium formulated no rinse cleaner / iron phosphatizer and paint pre-treatment for most metals in high-pressure wand applications.It will produce a high quality (non-metallic) tight bonded iron phosphate conversion coating on steel and iron parts while cleaning and slightly etchingzinc, galvanized and aluminum parts. Solution 2266SW is easily injected into the high-pressure stream and is instantly soluble. Solution 2266SW will clean medium to heavy-duty shop soils, drawing compounds; rust prevents, and water soluble machining fluids.Typicaldwell times will vary depending on the severity of the soils and types of metals to be cleaned.Typical temperatures during application range from 160 °F to 200 °F.
USING PROCEDURES
Solution 2266SW is recommended for use at concentrations between 1-2%.Solution 2266SW can be applied at 3-5% followed by a thorough rinse.Consult your Win Solutions representative for the optimum operating concentrations.
Solution 2702
Solution 2702SW is a concentrated alkaline cleaner / degreaser designed to remove most all types of soils at economical usage-costs.Another important advantage of this product is that it uses an effective wetting and emulsification package that will eliminate the disadvantages usually associated with other alkaline cleaners.Solution2702SW is very effective on cleaning heavy equipment such as off road construction equipment, fifth wheels, tires, or wherever heavy encrusted greasy soils are found.It can be used for a light duty paint stripper on some paints. Solution 2702SW can be used in soak tanks, steam cleaning operations, foam operations or gel operations.
USING PROCEDURES
Light Soil – Dilute 4 oz./gal. or 31mL/L (1:32) with water.
Moderate Soil – Dilute 8 oz./gal. or 63mL/L (1:16) with water.
Heavy Soil – Dilute 13 oz./gal. or 100mL/L (1:10) with water.
Very Heavy Soil – Dilute 26 oz./gal. or 200mL/L (1:5) with water.
Consult your Win Solutions representative for the optimum operating concentrations.
Solution 6502RPT
Solution 6502RPT is an economically formulated rust inhibitor fluid.It is the product of choice where moderate rust control is needed at minimal costs.Formulated with a reacted amine borate, Solution 6502RPT provides intermediate short term rust protection in most production environments where protection is needed prior to other production processes. Solution 6502RPT is primarily formulated to be used where rinse tanks are utilized in the production process
USING PROCEDURES
Solution 6502RPT can be used as a grinding or machining fluid at concentrations from 1:10 – 1:30 depending on the operation.When used as a rust preventative, it should be used at concentrations from 1:5 – 1:15.Consult your Win Solutions representative for the optimum operating concentrations.
Solution 5320
Solution 5320 is specially formulated to provide superior results in the prevention of scale and corrosion in open recirculating evaporative cooling systems.Solution 5320contains a concentrated blend of synergistic scale and corrosion inhibitors and polymer-based dispersants. Solution 5320is designed to provide peak heat transfer efficiency and maximum equipment life.
USING PROCEDURES
Solution 5320should be controlled by the amount of organo-phosphonate is in the recirculating water.Actual use rates will vary as determined by individual operating conditions and system requirements.
